RUST-X Silox                pdf

Product Description

RustX Silox is a silicone based lubricant intended to compliment RustX Silox in that it can be used with virtually any rubber polymer. Silox can also be used over a wider temperature range and in most cases will provide improved environment protection to the elastomer. It is recommended that Silox be used sparingly as only a thin film is necessary for optimum results. This lubricants is useful with a wide variety of fluid media since it is quite insert. High pressure systems as well as vacuum uses are typical applications where Silox is beneficial. Temperature range is -650°F to +4000°F

RustX Silox is non-toxic and non- irritating under normal conditioned. It will not clog 30 micron filters and is unusually moisture resistant and adheres with unusual tenacity.  

Physical & Chemical Properties

Physical Properties  RustX Silox 
Type  High viscosity silicone fluid 
Temperature Range °F
                             °C 
-65 to +400
(-54 to +204)
Seal Use  General purpose High pressure pneumatic
Will Pass through Micronic filter?  Yes
Compatible With  Fluorocarbon
Fluorosilicone
Nitrile
Polyacrylate
Polysulfide
Polyurethane
Butadiene
Butyl
Ethylene Propylene
Isoprene
SBR (GRS)
Silicone (2)  
 

Safety Information

RUST-X Products donot contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6), Polybrominated biphenyls (PBB), or Polybrominated di-phenylether complying with the re-stricted substances