Vanishing Oil Product Description RustX Vanishing oil is a performance oil formulated by high quality base oil with ester and anti-oxidation additives. It is “rinse-free oil” designed for the drawing, cold rolled steel sheets, and ironing processes on all kind of metal especially for aluminium or aluminium alloy sheets. Application Method: • Suitable for punching, stamping, drawing, bending and ironing of all kind of metal. • Especially suitable for making aluminium fins, and copper tube bending which are used in air conditioners, refrigerators, etc. Suitable for: CR Mills, Tube Mills, Wires, Macchined Steel Components, Aluminum components, Castings, Forgings, Gears, Fasteners, Shafts, bearings, engine bushes & bearings, axles & heavy components where light lubrication is also required Performance Features / Benefits • Rinse Free RustX Vanishing Oil is one of the rinse free oil, it rapidly evaporates from metal surface and does not need to be cleaned any further after completion of the operation, unlike conventional punching oils. Test for evaporation 1. Wind speed : 0.5 m/sec 2. Oil weight on sheet : 5 g/m2 of oil is on the aluminium sheet surface at the starting point. 3. Evaporation in room temperature : 25℃ • Higher Flash Point Not only excellent evaporation rate but RustX Vanishing Oil has also a relatively high flash point (PMCC) of 75 °C compared to most of punching oils in the market. • Good Lubricity RustX Vanishing Oil gives very good lubricity resulting in less damage to the die due to its Extreme Pressure and anti-wear properties. • Excellent Formability RustX Vanishing Oil has an excellent drawing performance in forming process. • Less skin irritation problems Compared with similar low viscosity oils Vanishing Oil is preferred applicable to most direct skin contact work. • No unpleasant smell Unpleasant smells are not desirable in the workplace. Typical Properties Properties Test Method Value Colour Visual Amber Clear Viscosity @ cSt @ 40°C ASTM D 445 2 cSt Specific Gravity ASTM D 1298 0.78 - 0.85 Flash Point (before application) ASTM D 92 75 oC Flash Point (after application) ASTM D 92 220 oC Volatiles by % (by weight) 99% Coverage (sq m/ Lt) 200 Pour Point ASTM D 97 Below -5oC Degreasability Passes Drying Time 5-30minutes Packaging Available 26 Liters Can & 210 Liters Barrel Safety Information RustX Vanishing oil is unlikely to present any significant health or safety hazard when rinse free property, but properly used in the recommended application, and good standards of industrial and personal hygiene are maintained. Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.