VCI RUSTX-30 HEAVY DUTY

Product Description

The Heavy Duty grade as the name implies provides long term corrosion protection against the most damaging environmental conditions. The protection of this oil surpasses the capability of any generic rust preventive and provides excellent protection even in open environments, sea worthy protection during exports as well as during long term storages of the components.
This Heavy Duty oil forms a light coat of rust preventive layer on the component which is not easily removable with light abrasive forces during handling, transportation and storages in protected or un-protected conditions.
This grade provides multi-purpose degreasing, dewatering and corrosion protection to the component on application. The grade is removable by washing with solvents or water based cleaners.
The product conforms to the engine oil compatibility requirements and does not require removal before fitment for engine components.  

Application Method

Dipping by far is the best method for oil application. The oil can also be applied by using Mist Spray, brush or sponge provided all the surfaces of the part are wetted with the Rust Preventive Oil.
Use of gloves while handling the components as well as immediate packaging is important. In case the components carry cutting oils or water from previous processes, dewatering with CL005 is recommended.

Suitable for: Engine components, Machined components, casting, Forging, CR White bodies

Features

• Fine film with strong adherence to the surface formed after evaporation of the solvent
• High Flashpoint solvent for safety & lower evaporation loss.
• Dries to form a dry feel film after 10 minutes of application.
• Excellent protection against acidic and saline environments
• Excellent Dewatering & Degreasing Properties.
• Non contaminating to cutting oils.  

Physical, Chemical & Corrosion Prevention Properties

Properties Test Method  Value 
Color  Visual  Dark Amber Color
Viscosity @ cSt @ 40°C  ASTM D 445  4-6 cSt
Specific Gravity
Flash Point (before application)
Flash Point (after application)
ASTM D 1298
ASTM D 92
ASTM D 92
 <1
65°C
220°C
Volatiles by % (by weight)    80%
Coverage (sq m/ Lt)    Up to 100
Drying Time    90 minutes
Film thickness ( After Drying)
Pour Point 
IS 2074
ASTM D 97 
2-3 microns
Below -5°C  
Saponification Value (mg KOH/gm)  ASTM D 94  5.0 - 7.0
 Dewatering    Passes
Degreasability    Passes

 Corrosion Prevention Properties    
 Salt Spray Protection  ASTM B 117  < 96 hours
 Humidity Chamber  ASTM D 1748  720 hours +
 Protection Life for Exports (In VCI Packaging)    Up to 5 Years
 Indoor Protection Life (open)    1 year
 Outdoor protection life (covered)    3 months

Packaging Available

26 Liter Can & 210 Liter Barrel  

Safety Information & Declaration

RUST-X Rust Preventive Oil don’t contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6), Polybrominated biphenyls (PBB), or Polybrominateddi-phenylether complying with the re-stricted substances listed in Article 4(1) of the RoHS Directive. RUST-X Rust Preventive Oils are also REACH & ROHS Compliant for exports to the European Union.