VCI 400 A Ex Dry

 VCI 400 A Description

  

pdf pdf
 TDS MSDS

RUSTX 400 A Ex Dry series oils contain VCI chemicals which work in contact phase as well as in the vapour phase and protect components by its dual action.

RUSTX – 400 A Ex Dry rust preventive oil is used where dry to touch feel on the component is required without the need to wash the component before fitting. The thin layered rust preventive also reduces the amount of dust accumulation on the part as well as is an excellent rust preventive for OE supplies where assembly line use of the components is required.

Exports of automotive components are a very critical task which requires specialized Rust Preventive Packaging schemes in synergism with highly effective rust preventive oils. RUSTX-EX Export Grade oils have higher, faster and longer duration of effective chemicals that protect the metallic components from saline atmospheres during sea transportation as well as long-term storage.

Application Method

  • Dipping by far is the best method for establishing an even layer on the component. 
  • Other methods may be used such as spraying, Brushing, Automatic Conveyor & Spray Jet provided the complete surface of the component is coated with the rust preventive oil.
  •  135 A – Ex should be used with VCI packaging for best long term corrosion prevention results.
  • Use of gloves while handling the components as well as immediate packaging is important. In case the components carry cutting oils or water from previous processes, dewatering with CL005 is recommended.

Suitable For

Engine Blocks, Machined Steel Components, Castings, Forgings, CR sheets, Bearings, Gears, Transmission Components, Axles, Process Equipment, Flanges, Valves etc.

 

Features

  •  Dry to touch  
  • Good coverage due to low viscosity-high floatability & high penetration properties
  • Less consumption due to thin film
  • Quick Drying - Dries within 5-6 minutes
  • Doesn’t contaminate cutting fluids
  • Excellent protection against acidic and saline environments
  • Excellent Dewatering & Degreasing Properties
  • Finger Print Remover 
  • Doesn’t produce fumes during welding or heat treatment
  • Non Sticky washable film

 

Typical Properties

Properties

Test Method

Value

Color  Visual  Amber Clear
Viscosity @ cSt @ 40°C  ASTM D 445  2-3 cSt
Specific Gravity  ASTM D 1298  0.78 – 0.83
Flash Point (before application)  ASTM D 92  110 oC
Coverage (sq m/ Lt)   100-140 
Film thickness  IS 2074  1-2 microns
Pour Point  ASTM D 97 Below -5oC 
Saponification Value (mg KOH/gm)  ASTM D 94  5.0-7.0
Washability    Yes
Removability    Yes
Paintability    Yes if concenterate
Engine Oil Compatibility    Pass
Dry Time to touch    15-30 minutes

Packaging Available

26 Liters Can & 210 Liters Barrel 

 

      

 

Safety Information 

RUST-X products do not contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6), Polybrominated biphenyls (PBB), or Polybrominated di-phenylether complying with the re-stricted substances listed in Article 4(1) of the RoHS Directive

RUST-X products are also REACH Compliant for exports to the European Union.