135 SERIES - HEAVY DUTY VCI RUST PREVENTIVE OIL                           pdf

Product Description

The Heavy Duty grade as the name implies provides long term corrosion protection against the most damaging environmental conditions. The protection of this oil surpasses the capability of any generic rust preventive and provides excellent protection even in open environments, sea worthy protection during exports as well as during long term storages of the components.

This Heavy Duty oil forms a light coat of rust preventive layer on the component which is not easily removable with light abrasive forces during handling, transportation and storages in protected or un-protected conditions. 

This grade provides multi-purpose degreasing, dewatering and corrosion protection to the component on application. The grade is removable by washing with solvents or water based cleaners.

The product conforms to the Engine Oil Compatibility requirements and does not require removal before fitment for engine components.

Application Method:

Dipping by far is the best method for oil application. The oil can also be applied by using Mist Spray, brush or sponge provided all the surfaces of the part are wetted with the Rust Preventive Oil.

Use of gloves while handling the components as well as immediate packaging is important. In case the components carry cutting oils or water from previous processes, dewatering with CL005 is recommended. 

Suitable for:

Engine components, Machined Components, Castings, Forgings, CR white bodies.


  • Fine film with strong adherence to the surface formed after evaporation of the solvent.
  • High Flashpoint solvent for safety & lower evaporation loss.
  • Dries to form a dry tacky film after 10 minutes of application.
  • Excellent protection against acidic and saline environments.
  • Excellent Dewatering & Degreasing Properties.
  • Protective Film that does not get scratched easily and protects during handling and storage.

Typical Properties

Properties  Test Method  Value
Colour   Visual Dark Amber Colour
Viscosity @ cSt @ 40°C  ASTM D 445  5-7 cSt
Specific Gravity  ASTM D 1298  < 1
Flash Point (before application)  ASTM D 92  65 oC
Flash Point (after application)  ASTM D 92  220 oC
Volatiles by % (by weight)    70%
Coverage (sq m/ Lt)    Upto 100
Drying Time    90 minutes
Film thickness ( After Drying)  IS 2074  4-5 microns
Pour Point  ASTM D 97 Below  -5oC
Saponification Value (mg KOH/gm)  ASTM D 94  5.0-7.0
Dewatering   Passes
Degreasibility   Passes
Corrosion Prevention Properties    
Salt Spray Protection  ASTM B 117  < 576 hours
Humidity Chamber  ASTM D 1748  2000 hours +
Protection Life for Exports (In VCI Packaging)    Upto 5 Years
Indoor Protection Life (open)    2 year
Outdoor protection life (covered)    12 months

Packaging Available

26 Liters Can & 210 Liters Barrel

Safety Information

RUST-X Rust Preventive Oils donot contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6), Polybrominated biphenyls (PBB), or Polybrominated di-phenylether complying with the re-stricted substances listed in Article 4(1) of the RoHS Directive.

RUST-X Rust Preventive Oils are also REACH Compliant for exports to the European Union.