EVAP 3                                                                                                                          

evap3

TDS

 

EVAP3 DESCRIPTION

 

RUST-X Specialised in Corrosion Prevention and designs products to provide advanced corrosion inhibition for metals. The products contain special inhibitors that prevent corrosion of steels, copper tarnishing and aluminium white oxide formation.

 EVAP-3 OIL is a  MEDIUM DUTY solvent based Disappearing Lubricant designed for those applications wherein minimal oil film is permissible. This product leaves a thin imperceptible film of lubricant that facilitates a clean die release of thin sheet or roll stock. The carrier generally dries in 20 minutes to 1 hour. Normally, cleaning is not required after using vanishing lubricant. 

 

EVAP-3    will  virtually disappear  - at pre-determined intervals - thus completely  eliminating  need  for any further  cleaning, degreasing, buffing or polishing prior to shipping in many operations. EVAP-3 specifically formulated for use in roll forming and press operations on pre finished and other specialty metals. EVAP-3 is a heavy duty grade in-tended for use in severe applications. It will provide better finish when forming heavier  gauge metals or tougher alloys. EVAP-3  is recommended for galvanized aluminum strip, copper and steel.

  

Application

Suitable for ferrous and non ferrous metals

Ideal where rapid drying is required

Where surfaces are painted with oil paints

Burns clean in annealing ovens

Absolutely transparent 
Moderate evaporation rate - doesn't disappear too quickly! 
Flash point is above 100 F. 
Very low odor

 

Physical Properties

 

Physical Properties

Test Method   

EVAP3

Colour Visual Transparent Clear
Viscosity @ cSt @ 40°C ASTM D  445 1.1-1.2
Specific Gravity ASTM D 1298 0.8
Flash Point  ASTM D 92 100 oC
Volatiles by % (by weight)       >99%
Degreasability   Passes
Corrosion Prevention   Few Weeks upto 2 years depending upon the metal on which it is applied and packaging

 

 

 
 EVAP 3
 
 

Safety Information

RUST-X oils donot contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6), Polybrominated biphenyls (PBB), or Polybrominated di-phenylether complying with the re-stricted substances listed in Article 4(1) of the RoHS Directive.

RUST-X Rust Preventive Oils are also REACH Compliant for exports to the European Union.

This Data sheet and information it contains is considered to be accurate at the date of printing. No representation or warranty, expressed or implied is made as to the accuracy or completeness of the data and information