 |
Water Based Cutting Fluids
|
Mineral Oil Coolants
|
WS Series -Mineral Oil Based Water Soluable
|
RustX niche and most desired range of products WS series give magical results to your metals or non-metals. High tank lif and extremely friends for operators. works upto 700ppm of hard water for emulsion stability but most suitable against with DM W |
Tank life upto 6-12 months |
WS 50 |
V40=55mm2/s |
Ratio 1:20 to 1:40 |
Medium and Heavy duty
Machining and Grinding
|
 |
 |
TDS |
MSDS |
|
Semi Synthetic Fluids
|
SHARP Series -Semi Synthetic Cutting Fluids
|
Semi synthetic fluids with heat reducing formula and high rust prevention and tank life |
|
SHARP 3,000 |
White Emulsion
Tank life upto 2 years
Tool life increment upto 50%
Consumption reduction upto 50%
|
Hi Speed machining and grinding
Hard Metal machining
Suitable for VMC's,HMC's,CNC's
|
 |
 |
TDS |
MSDS |
|
Synthetic Fluids
|
SYN Series -Synthetic Cutting Fluids
|
Synthetic cutting fluids are most ideally suited for grinding and machining operations where high heat and friction is genera
SYN Series provide good lubrication but more than provide best cooling properties, rust prevention and tank life.
|
|
SHARP 11,000 |
Transparent, Green or Blue emulsion Tank life upto 2 years |
High and low speed grinding
High and low speed grinding
|
 |
 |
TDS |
MSDS |
|
|
|
|
|
|
Oil Based Cutting Fluids
|
Metal Working Fluids
|
GRINDX Series -Oil based cutting fluids
|
High-performance neat oils for grinding and honing of steel and non-ferrous metals |
Grinding |
GRIND-X 5,12
GRIND-X 22
GRIND-X 32
|
V40=5,12mm2/s
V40=22mm2/s
V40=32mm2/s
|
Hard metal grinding
Tool grinding
Tool grinding
|
 |
 |
TDS |
MSDS |
|
Honing |
HON-X 22 |
V40=22mm2/s
|
Cylinder honing
|
|
Metal Working Fluids
|
NEATCUT Series- Oil based cutting fluids
|
High-performance cutting oils for turning and drilling operations. Suitable for ferrous and non ferrous metals. Neatcut series products are loaded with high contents of extreme pressure additive for heat reduction and efficiency increment. |
Turning,drilling
Turning,drilling,grinding
Vertical broaching
|
NEATCUT 5 NEATCUT 12 BROACH-X 16/22 BROACH-X BT 18/BT22 |
V40=10mm2/s
V40=12mm2/s
V40=22mm2/s
V40=18mm2/s
|
Steel,non-ferrous metals
Steel,precious steel
internal-external profiles
internal-external profiles
|
 |
 |
TDS |
MSDS |
|
Helical broaching(HOBBING) |
HOB-X 12 HOB-X 22 HOB-X 32 |
V40=12mm2/s
V40=22mm2/s
V40=32mm2/s
|
Sprocket hobbing Gear hobbing Gear hobbing |
 |
 |
TDS |
MSDS |
|
Forming oils
|
Form-EZ Oils- Extreme Pressure Forming Lubricants
|
High Performance extreme pressure additive fortified forming oils for most demanding applications. |
|
FORM-EZ 12,32,46,68,100 |
V40=12mm2/s
|
 |
 |
TDS |
MSDS |
|
Drawing Oils-Neat Oil
|
EVAPORATE Oils for a dry & clean component
|
Neat drawing lubricants for bright bars, tubes and wire drawing operations on any severity |
|
DRAW EZ 32,54,100,220,320,680,1000 |
High performance extreme pressure additive fortified chlorinated drawing oils for demanding applications. |
 |
 |
TDS |
MSDS |
|